Testing Machine

Product Details:

Porfile Projector to suit every need and budget. It comes in three different types i.e. vertical projection table top and floor models, Horizontal Projection models. Standard models come with screen diameters from 200mm to 600mm. However, as a special requirement 1000mm screen diameter profile projector can also be supplied.

All Projeactors are supplied with high resolution, low distortion telecentric lenses. Magnification range from 5x to 100x.

The X, Y, measuring stages incorporate the unique screwless design with zero backlash and quick release facility. We offer a choice of illumination systems i.e. colimated beam condensed light of fiber - optic cold source.

A variety of measuring systems from plain 2 axis DRO to 3 Axis microprocessor based geometric function DRO and advanced computerized measuring system with Graphical User Interface and capability to do reverse engineering.

Product Details:

ROCKWELL HARDNESS TESTING MACHINE, MODELS: MRS, MRS - 150, MRB, MRB - 250 AND MSM
are manually operated. These models are designed and developed after years of experience in this field. All the Models are manufactured under strict quality control at all manufacturing stages.

These models are suitable for testing hardness of metals and alloys of all kinds, hard or soft, whether flat or round etc. or of irregular hape. These Testers are simple in design and easy to operate, still yet quite sensitive and accurate.

Various Models from the wide range are available for Institutes, Quality Control Laboratories, Tool -rooms, Heat Treatment Dept., R & D Laboratories, etc.,

These models strictly conforms to IS: 1586-2000, BS: 891 - Part 1 & 2 for Rockwell & Rockwell Superficial test. IS: 2281 - 2005, ASTM - E-10 for Brinell Test.

Product Details:

Hard Bearing type horizontal two plane Dynamic Balancing Machine with microprocessor based / microcontroller based measuring panel. Most suitable for suitable for balancing of different types of rotors like rotors of Electric machines, Fly Wheels, Crankshafts cylinders, submersible pump rotors, etc.

Working of these machines is very simple. Double start push button is provided to start the machine. The cycle is fully automatic which starts the machine, measures and stores the unbalanace in grams (gms) along wiht the angle for two selected planes on digital display simultaneously & stops the machine (with brake, if machine is provided with electrical braking facility). The measuring cycle takes aroung fifteen seconds for smaller rotors. For higher capacity machine, the drice is provided through motor. To avoid any damage to drive coupling and other rotating parts in drive system, electronic soft starter is incorported with machine.

Key board facility is provided on measuring panel for data feeding of dimensions like A, B, C, RL & RR tolerance limits for both correction planes i.e. TLL, TLR can be fed so that when rotor is balanced within specified limits, respective LED glows up, indicating no further correction is required.

Product Details:

Dynamic Hardness Tester is an extremely light weight, portable, fast & reliable hardness tester based on a novel, dynamic & Rapid test procedute with widest measuring ranges for metals.

A carbide tipped shuttle with a definite kinetic energy is impacted on the specimen. A part of this energy absorbed by the specimen and is a function of the hardness of the specimen. A tubular device housing electrodynamic energy measuring device carries out the impacting of the shuttle. A measuring instrument receives the signal, equivalent to absorbed energy through a cable and displays with instant calculations. This displays Dynamic Hardness (D) a three digital figure, which is proportional to the hardness of the specimen he machine has built inconversion facility for given materials to convert ''D'' value to Vickers, Rockwell, Brinell scales which can be selcted by pressing ↑ ↓ eys.

Applications:

• In stores for Material identification.
• Measurement of Hardness in confined spaces.
• Variation in hardness over large work piece.
• Large & Heavy components.
• Permanently installed parts.
• Surface hardened component or hardness on coatings

Salient Features:

• Sleek and handy design, comes in a slim briefcase, for carrying the machine.
• Alpha numeric display which indicates selected material & Scale combination & Hardness value.
• Average key to select average of 2 to 10 readings.
• Machine is having improved electronics with micro controller circuitry & User friendly software.
• 30 Hardness scales for different probes selectable by feather touch keys.
• Auto detection of probe facility is given.
• Automatic shut down facility is provided when machine is not in use for continuously 10 minutes.
• This model operates on 2 numbers of pencil cells.
• Printing is possible with all types of ports i.e. Dot matric (Centronic parallel port).
• Up to 999 readings can be stored in memory of the machine for printing purpose.
• Low test expenditure.
• Five numbers of probes can be given in different combinations.
• For eg. D1, D2, G1, G2 & C, * D 1, D2, D3, D4 & D5, * D1, D2, G1, SH &C.
• Conversion of UTS facility is available on display by using side keys ←. This is applicable for only BHN scale for the range 226 to 634 BHN (Hard steel & hard alloys only.)
• Display last result (For eg. From Sr.No. 20 onward) facility is given by using upper arrow key (↑) & down arrow key (↓). Also we can scroll through stored readings .
• The ON/ OFF switch is provided with feather touch key board on front side .
• In this model both serial & printer interfaces are available on single port (serial interfaces is an extra accessory)
• Automatic calibration facility of probe is available through keyboard .
• serial interface is possible with RS 232.
• Data entry & datawise printout facility is available.
• we can recall the readings one by one by using arrow key ↑ ↓ on display , in display result mode.
• Backlight ON/OFF facility is given by using arrow key ↑→ through key board.

Product Details:

Electronic Tensometer, MODEL: ER - 1 Electronic Tensometer with Load Cell and Digital Readout for Force & Displacement measurement. Facility for Automatic Peak Detection with Digital LED Display.

Product Details:

Hard Bearing type horizontal two plane Dynamic Balancing Machine with microprocessor based / microcontroller based measuring panel. Most suitable for suitable for balancing of different types of rotors like rotors of Electric machines, Fly Wheels, Crankshafts cylinders, submersible pump rotors, etc.

Working of these machines is very simple. Double start push button is provided to start the machine. The cycle is fully automatic which starts the machine, measures and stores the unbalanace in grams (gms) along wiht the angle for two selected planes on digital display simultaneously & stops the machine (with brake, if machine is provided with electrical braking facility). The measuring cycle takes aroung fifteen seconds for smaller rotors. For higher capacity machine, the drice is provided through motor. To avoid any damage to drive coupling and other rotating parts in drive system, electronic soft starter is incorported with machine.

Key board facility is provided on measuring panel for data feeding of dimensions like A, B, C, RL & RR tolerance limits for both correction planes i.e. TLL, TLR can be fed so that when rotor is balanced within specified limits, respective LED glows up, indicating no further correction is required.

Product Details:

Dynamic Hardness Tester is an extremely light weight, portable, fast & reliable hardness tester based on a novel, dynamic & Rapid test procedute with widest measuring ranges for metals.

A carbide tipped shuttle with a definite kinetic energy is impacted on the specimen. A part of this energy absorbed by the specimen and is a function of the hardness of the specimen. A tubular device housing electrodynamic energy measuring device carries out the impacting of the shuttle. A measuring instrument receives the signal, equivalent to absorbed energy through a cable and displays with instant calculations. This displays Dynamic Hardness (D) a three digital figure, which is proportional to the hardness of the specimen he machine has built inconversion facility for given materials to convert 'D' value to Vickers, Rockwell, Brinell scales which can be selcted by pressing ↑ ↓ eys.

Applications:

• In stores for Material identification.
• Measurement of Hardness in confined spaces.
• Variation in hardness over large work piece.
• Large & Heavy components.
• Permanently installed parts.
• Surface hardened component or hardness on coatings

Salient Features:

• Sleek and handy design, comes in a slim briefcase, for carrying the machine.
• Alpha numeric display which indicates selected material & Scale combination & Hardness value.
• Average key to select average of 2 to 10 readings.
• Machine is having improved electronics with micro controller circuitry & User friendly software.
• 30 Hardness scales for different probes selectable by feather touch keys.
• Auto detection of probe facility is given.
• Automatic shut down facility is provided when machine is not in use for continuously 10 minutes.
• This model operates on 2 numbers of pencil cells.
• Printing is possible with all types of ports i.e. Dot matric (Centronic parallel port).
• Up to 999 readings can be stored in memory of the machine for printing purpose.
• Low test expenditure.
• Five numbers of probes can be given in different combinations.
• For eg. D1, D2, G1, G2 & C, * D 1, D2, D3, D4 & D5, * D1, D2, G1, SH &C.
• Conversion of UTS facility is available on display by using side keys ←. This is applicable for only BHN scale for the range 226 to 634 BHN (Hard steel & hard alloys only.)
• Display last result (For eg. From Sr.No. 20 onward) facility is given by using upper arrow key (↑) & down arrow key (↓). Also we can scroll through stored readings .
• The ON/ OFF switch is provided with feather touch key board on front side .
• In this model both serial & printer interfaces are available on single port (serial interfaces is an extra accessory)
• Automatic calibration facility of probe is available through keyboard .
• serial interface is possible with RS 232.
• Data entry & datawise printout facility is available.
• we can recall the readings one by one by using arrow key ↑ ↓ on display , in display result mode.
• Backlight ON/OFF facility is given by using arrow key ↑→ through key board.

Product Details:

We are engaged in offering this to our clients. Our range of all products is widely appreciated by our clients.

Product Details:

Computerized tensometer,
Model: pc 2000 (fully automatic, computer controller horizontal tensile testing machine)

The Model PC 2000 is top of the range model in the series of Tensometers. It combines the state of art Computer Technology and precision manufacturing techniques to offer unique Mini Horizontal Universal Testing Machine. The machine is operated through PC. The on line test graph is displayed on monitor. The features in software is the ultimate solution for ever increasing stringent demand of material testing in quality inspection.

The Model PC 2000 is supplied with Servo Drive Motor and the test speeds can be selected and applied through PC.

The suitable mechanism is provided for easy setting of higher or lower range of speeds as per test piece material standards.

FEATURES :

• Load Cells for high precision load measurement Servo Motor Drive

• Servo Motor Drive

• Rotary optical encoder for precise elongation measurement.

• Window based, menu driven support software for complete test control.

• Load Cells available - 20kN, 10kN, 5kN, 2kN, and 0.2kN (Optional).

• Well defined computer protocol for integration with computer.

• Programmable Computer interface for data as well as control.

• Auto detection for origin as well as end of the test.

• Online curve plotting of load vs displacement.

• Generates calculations of stress, strain, Engineering Stress & Strain, area under the curve etc., for material study.

• Zoom facility for close view or deep study of the curve.

• Extensive error indication.

• Overtravel protection.

• Overload protection.

• Test Report generation.

Product Details:

''SERVO’ Computerized Universal Testing Machine of various capacities beginning from 400kN to 2000 kN hydraulically operated along with standard accessories, USER FRIENDLY SOFTWARE as per our Standard supply and Printer interface. Along with Load Rate and Strain Rate Controller facility.

Features:

• All the features / software / accuracies mentioned for Computerised Control Panel.
• Electronically controlled sophisticated imported pressure and flow control valves along with the dedicated controller are used and they are controlled in cloased loop with PID looping.
• Load accuracy as high as ± 1% of indicated load value.
• Variable load rates and strain rates can be selected through computer to suit the wide range of materials.
• The Data Acquisition System (DAS) supplied with the machine can be connected to any new generation computer (PC or Laptop) using USB port.

Principle of Operation:

• Here Pressure Control Valve and flow control valve are controlled by electronic
• circuitry in closed loop system to get the desired Loading Rate and Straining Rate.

• Standard manual control
• Load Rate control mode.
• Strain Rate control mode.
• Load Hold Mode.
• Load Rate and Strain Rate in single test (one at a time).

 

 

 

Product Details:

‘SERVO’ Computerized Universal Testing Machine with servo control and Hydraulic front open grip of various capacities from 600kN to 2000kN hydraulically operated along with standard accessories & USER FRIENDLY SOFTWARE as per our standard supply and Printer Interface along with Load Rate and Strain Rate Controller facility.

Front Open Crossheads:

• This is an important feature which facilitates insertion of tensile specimen from the front. This is extremely useful especially for heavy specimens and bigger capacity machines. In this type of machine the jaws and the inserts also can be easily removed by just pulling from the front. When the jaws and inserts are heavy, it is very difficult to remove them from the machine from upper or lower side. Hence, this is an important feature from the point of view of easy operation.

Hydraulic Grips:

• Normally for standard Universal Testing Machines the jaw opening and specimen clamping is effected manually. But this becomes more and more difficult for the operator for higher capacity machines. Also the specimen clamping becomes operator specific in this case. Hence it is a better choice to go for hydraulic operation on jaw (Closing and opening). In this hydraulic griping method, separate double acting hydraulic cylinders operate the jaws and the cylinder operation is just by pressing a push button. So the operator has to operate only push buttons, which are conveniently located on the machine, to operate the jaws. A power pack with oil tank, pump, motor oil filler cum breather, oil level indicator, filter, relief valve is provided along with an electric motor is drive the hydraulic pump.

Product Details:

Computerised cum Analogue Universal Testing Machine of various capacities beginning with 100kN to 2000KN hydraulically operated along with standard accessories. USER FRIENDLY SOFTWARE as per our standard supply.

THIS IS THE COMBINED VERSION OF ANALOGUE MODEL AND COMPUTERISED MODEL TOGETHER.

 

Additional Information:

• Item Code: TUE-CN-
• Port of Dispatch: MIRAJ, MAHARASHTRA

Product Details:

Metallurgical Microscopes:

• Metallaurgical Micrscopes are suitable for Metallography, minerology, precession engineering and electronics industries.
• Metallaurgical Microscopes are used for industrial as well as scientific research and teaching applications.
• Microscopes are offered in two varieties. MVMS U 300 is an Upright Model, suitable for moulded samples. MVMS I 300 is an Inverted Model suitable for samples polished from only one side. Thje inverted design eliminates the necessity of make moulds.
• The Microscopes are equipped with plan achromatic objectives, wide field eyepiece, and polairze. The micrscope is equipped with large stage with co - axial controls with coarse and fine movements for precise focusing. It provides clear and high contrast images. convenient operations.

Product Details:

MICRO VICKERS HARDNESS TESTING MACHINE

Application:-

• Finished components (thin sheets, Fine wires, etc) Watch parts like Springs, Pivot bearings, Gears, Cutting edge of Razor blades, Drills, File teeth, Metallic foils, Surgical needles, Pen points and so on.

• Study of surface coatings like electroplated coatings, extremely thin case hardened parts, anodised castings of aluminum, shot blasted or rolled faces.

• Heat Treatment effects like Tempering of steel, Hardness of visible precipitated particles, hardness of austenitic and martensitic areas, homogenization treatment.

• Alloys constitutional problem, (Micro indentation tests in study of equilibrium diagram), mutually soluble / insoluble materials, hardness of complex carbides, hardness of components of micro structure.

Product Details:

MODELS: BV - 50, BV - 50 (S), BV -120, BV - 120(S), BV - 250, BV - 250(S). These models are suitable for Vickers and Brinell Hardness of steel and other metals. These machines are designed and manufactured for very high accuracy, reliability and easy of operation. The selection of load is effected with the push button control system. The measurements of diagonal / diameter of indentation is done with the help of built - in optical system with graduated readout with Micrometer. After taking indentation on the work piece, the objective lens is automatically swivelled into postion and image of indentation appears on the focusing screen fitted in front of the machine. A push button is starting the loading cycle and unloading is accomplished through hand lever. This machine conforms to IS: 1754:1986 for Vickers and IS: 2281:1983, BS: 240 for Brinell Test.

Product Details:

Computerized Universal Testing Machine of various capacity begining from 100 kN to 2000kN hydraulically operated along with standard accessories USER FRIENDLY SOFTWARE as per our standard supply. The oil pressure in the main cylinder is also transferred to an electronic pressure transducer which gives a proportionate singal to the Data Acquistion Unit. Both,the motor for hydraulic operation and cross head motion, are controlled by push buttons, and they have interlocks to prevent simultaneous working of the motors. The electrical panel is fiex on the control panel. Displacement measurement is carried out by means of a Rotary Encode. Encoder signal is fed to the Data Acquistion Panel to get displacement in mm. Fully protected and enclosed (dust proof) high precision Sensors and Encoders are used for Load and Elongation measurement.

FEATURES OF DATA ACQUISITION UNIT:

• Attractive and elegant Aluminium panel is provided for heat dissipation
• A Micro - controller based data acquisition system for data acquisition and indication.
• 4 Lines x 20 Characters LCD display for displaying Load & Crosshead travel values.
• Simplicity reading because of digital (LCD) display
• Membrane keyboard for data entry.
• Auto - detection of over - load, over- travel & specimen break. On detection of any of these conditions, the hydraulic motor is automatically switched off.
• Load is indicated with resolution of 0.005% of machine capacity.
• Elongation is indicated with a resolution of 0.01mm
• Tare Load and Reset Elongation facilities available.

Product Details:

Analogue Universal Testing Machine of various capacities beginning from 100kN to 2000kN hydraulically operated along with standard accessories.

Load Measuring System:

• The Oil pressure in the main cylinder is transferred to the small dynamometer cylinder. The dynamometer piston is kept rotating at a slow speed to ensure dynamic friction condition. The piston exerts a force proportionate to the pressure on the hanger connected to one arm of the pendulum, through an auto range selecting lever system. This force deflects the pendulum. The range selection can be effected by simply turning a knob, provided outside of the panel. An effective damping arrangement is provided to ensure slow return of the pendulum after sudden fracture of the test specimen.

Load Indicating arrangement:

• The pendulum lever pushes rack which slides over two pulleys. The rack movement is proportionate to the load. A pinion is engagement with the rack rotates and moves the pointer fixed to its shaft. The pointer moves over a large dial indicating the load. A window type dial is provided for easy and clear change of the load range.

Recording System:

• A continuous roll type load elongation recorder is provided for plotting a load – elongation graph. Load is plotted by the horizontal movement of the rack. Elongation is plotted on the vertical axis and is equal to the movement of the main piston. Elongation ratio of 1:2 & 1:5 can be obtained.

Accuracy and Calibration:

• All measuring ranges of the machine are calibrated within an accuracy of ± 1% from 20% to 100% of each range as per IS: 1828 and BS: 1610.

Product Details:

Brinell Hardness Tester, Model: AKB - 3000 is designed for Brinell Hardenss measurement on steels and other ferrous materials and also on non ferrous materials likeBrass, Bronze, Aluminium, etc., The material can be cast, forged or rolled and the shape can be flat, round or irregular. The actual load application system is of dead weight type combined with mechanical lever system. The supporting hydraulic system is for initial lifiting of load before each test and dampening the load application system for smooth application of load. A Separate hydraulic power pack, positioned in the bottom part of the machine adds to the machine stability. Our unique design of a floating fulcrum lever system ensures high accuracy and dependability. The machine accuracies conforms to IS : 2281 - 2005 & BS : 240.

Product Details:

Features:

• This is modified version of AKB - 3000 which is provided with an inbuilt optical system of 14X magnification.
• An automatic indenter index system is provided which tilts the indenter after the impression and the magnifield image is visible on the screen for measurement with a 0.01mm least count.
• Thus this machine gives fast and accurate results with less operator fatigue.
• This model is mainly useful for production testing in Auto shops, Foundries, Forge shops & Heat treatment units etc.

Product Details:

ROPE & CHAIN TESTING MACHINE

FEATURES :

Horizontal Chain & Rope Testing Machine incorporated following design features.

• High loading accuracy

• Infinitely variable straining speeds to suit a wide range of materials.

• Continuous roll autographic recorder to get load elongation graph.

• Robust loading frame.

• Simple controls for ease of operation.

• Adequate safety devices for safe operation.

• Analogue models with large dial and digital models with digital display for load and elongation.

• Extra features to suit special applications on request.

APPLICATION :-

Horizontal Chain & Rope Testing Machines are designed to test chain, ropes and any long specimens for proof test or destructive tensile test.

Product Details:

Features
The machine has a C- Type load frame.
This machine has been designed for production testing & for continuous operation.
This machine is used to measure Brinell Hardness value of cast or forged components.
Wide range of testing with 4 load steps.
Hydraulically loading / unloading system is provided with laod / unload knob for operation.
Fully computerised system for indentation measurement and display.
Windows based software system.
Accurate measurement of Brinell Hardness through matched Optics, CCD Camera, Hardware & Software using advanced image processing technology.
On removal of load the optics will transfer the image of indentation to CCD. The image is further digitalized and processed by PC for measurement. The diamter of the image can be measured automatically / manually to give Brinell Hardness value.
Two modes of measurement - Manual & Auto.
In Auto mode the image is scanned for measurement & hardness is displayed automatically.
Verification facility is provided for clear indication of measured impression by encircling the same.
Windowing facility is provided which encircles the blurt images for better accuracies.
Macro & Micro adjustment facilities are provided in manual mode for fast & accurate encircling of the image to be measured.
Batch testing facility is provided.
Statistical Analysis report can be generated.
Calibration mode is provided with password protection.
The machine accuracies conforms to IS: 2281 - 2005 & BS: 240

Product Details:

Features:

• Suitable for Torsion and twist tests on various metal rods and flats.
• Torsion measurement by torque cell.
• One range with a high resolution throughout the range.
• Geared motor to apply the torque to specimen through gear box.
• Measurement of Angle of Twist on LCD display provided on Data Acquisition System.
• Facility for connecting the DAS Panel to PC.
• Accuracy of torque measurement ± 1% in the range from 4% to 100% of machine capacity.
• Provision to conduct test slowly by a handle facilitates finding modulus of rigidity 'G'

Product Details:

Features:

• Tensile Testers conforming to the following standards i.e. IS, BS, ASTM, DIN or ISO are now available for Automotive, Textile, Paper, Steel, Food & Packaging, Aero Space & Defence, Wire & Cable industries, etc…
• Suitable for Testing a wide range of materials like rubber, wood, plywood, plastic, rexins, ceramics, Teflon, cardboard, latex, composites, ferrous metals, non – ferrous metals, etc., of various forms like round, flat, thread, wires, dumbbells, fabric, belts, strips, ropes, etc…
• Variety of tests like Tension, Compression, Cross breaking / Bending, Shear, Linear Bonding / Gripping / Peeling strength of adhesives & Tapes, etc. are conducted.
• Wide range of Grips, Attachments & Special fixtures are available to suit variety of material and shapes.

Other Details:

• Simple construction and control for easy operation and maintenance.
• Three measuring ranges for accurate testing
• Continuous roll autographic “Load Vs Elongation” recorder.
• A number of straining speeds are available for proper selection.
• Wide range of grips to suit variety of materials and shapes.
• Provision of adequate safety devices.
• Machine with AC or DC drive motor is available.
• Various models – Maximum capacity from 200N to 50kN
• Loading accuracy well within ± 1%, conforms to IS : 1828 / BS : 1610.
• The Machines are electrically operated. The electric motor through belt and gear reduction rotates the main nut which causes up and down motion of lower gripping head. The downward motion applies tensile force on the specimen which is measured by the pendulum dynamometer and is indicated on the dial.

Product Details:

DIGITAL TENSILE TESTING MACHINE

• It is a Digital model and comes with the electronic panel only.  It does not have the software and hence cannot be connected to PC.
• Load measurement by load cell.
• Over load & Over travel safety.
• On line display of Load and Elongation.
• Tare Load & Reset Elongation facilities available.
• It is possible to use a number of load cells, say two or three, to cover much wider range of load, to suit the application. 
• Standard load resolution is with 10,000 coounts. Finer resolution (optional) with 20,000 counts can also be offered at extra cost.  Standard displacement resolution is 0.1mm.
• Types of tests, testing materials, grips, attachments, fixtures, straining speed as like analogue version Model: TKG.
• Various Models - Maximum capacity from 200N to 50kN.
• Loading accuracy well within ± 1% conforms to IS: 1828 / BS : 1610 from 2% to 100% of capacity of load cell.

Product Details:

Application:

• To measure brinell hardness directly on machine where presently brinell microscope is used. this avoids eye straining of operator on production testing. in addition it gives far better repeated accuracy. high - low limits selection enables operator easy acceptance rejection of components.

Easy to transport anywhere and handy for use with easy set up. scope of supply:

• One hand held unit containing ccd camera, optics and illumination system with connecting cable.
• PCI video capture card with driver software.
• Brinell image analysis system software.
• Pc and windows 98 / 98 se operating system is to be procured by customer.

Product Details:

Features:

• For charpy tests on various materials.

• Strictly conforms to ASTM - E -23 -2007 specification.

• Works on pendulum principle. Difference between height of drop of pendulum before rupture and height of rise after rupture of specimen is directly proportional to Impact energy absorbed by specimen and is indicated by a pointer on a large dial for Model: AIT- 300 - ASTM & on digital display for Model: AIT- 300 - ASTM (D).

• Single stand design which facilitates fast and easy positioning and centering of specimen which is a basic requirement of sub - zero testing.

• Unique spring loaded braking system for smooth and jerk free braking.

• NIST approval of machine with samples from NIST - USA, can be arranged.

• Model: AIT - 3000 - ASTM (D) is a digital version of Model: AIT - 300 - ASTM.

Product Details:

Salient Features:

• Methods of Loading by Re-ciculating Ball Screw.
• AC Servo motor to precise crosshead control with infinitely variable speed drive.
• Computerised crosshead control.
• Load Measurement by load cell.
• Over travel safety by fixed and settable limit switches at both ends.
• Overload protection for load cell by electronic control.
• Single form windows based user friendly software.
• Test data and reports are stored in access database.
• User programmable strain rates in many steps.
• User can select results from availabe result list for report.
• User defined reports.
• User can select test from templates and can start similar test.
• Variable sample break detection.
• Tare load and reset elongation facilitiess available.
• Load and Elongation is continuously displayed on screen.
• Statistical output for a batch in report.
• Simultaneous display of two graphs is possible is real time testing.
• On line display of Load & Displacement (Stress, Extension, Strain) etc., while test is conducted.
• Real time graph of Load & Elongation, Load & Time, Stress & Strain is displayed & is auto scaled.
• User selectable units for Load & Displacement (N, Kg, kN, Ibf, mm, inch, etc..)
• Report can be printed on any printer with two graphs.
• Large storage space for storing test data and results.
• Provision of calculation of Load & Elongation at yield, Peak load & load at break, Yield stress, Ultimate stress, etc.
• Specific software for Tensile, Compression, Shear test & Other tests.
• If Electronic Extensometer is used then proof stress values from 0.1% to 1% can be determined.
• Software will give alert to user to remove extensometer when load crosses the proof load value.
• In order to cover wide load range, more load cells can be supplied (Optional), in that case user has to select the load cell for test.
• Standard load resolution is with 10,000 counts. Finer resolution with 20,000 or 50,000 counts can be offered (Optional).
• Other slower crosshead speed on specific request (Optional)

Product Details:

Features:

• 2000N is the maximum capacity of the machine. The same machine can also be used for lower capacity say 1000N or 500N etc. In that case the load cell of desired capacity is to be used. Cost of one load cell is included in the price.
• It is possible to use a No. of load cell say two or three, to cover much wider range of load, to suit the application. The additional load cell will be at extra cost.
• Tension shackles provided will suit most of the normal springs. But if there is peculiar special geometry of tension spring, a special tension shackle may be required and can be offered at extra cost.
• For compression springs, we provide one basic set of compression plates, but the compression springs need spring guides and they should be made by the customer themselves. But we also can supply the spring guide at additiional cost if the spring geometry details are furnished.

Product Details:

Salient Features:

• Accuracy conforming to IS 1828 Gr. 1.
• Three standard measuring ranges with auto load selection facility.
• Simple design, robust construction, smooth operation and easy maintenance.
• Easy, stepless adjustment of straining rate.
• Deflection on Digital Readout with unique least count of 0.1mm.
• Large Size table for wide range of springs with motorized rapid adjustment of test hiehgt.
• Standard autographic recorrder.
• Over load / over travel safety provisions.
• Facility of Compression , Shear and bending test with extra accessories.
• Calibration in kgs available on request.

Application:

• The Spring Testing Machine comes in two models, STM for helical Coil Springs, and FST for Leaf Springs. The machine can also conduct compression, shear, bending and hardness tests.

Product Details:

IMPACT TESTING MACHINE, MODEL: AIT - 300 - N & AIT - 300 EN

Features:

• Suitable for Charpy  and Izod Impact Tests on various materials

• Rigid designs of machine frame and other parts assure minimum energy absorption during fracture which results in improved test accuracies.

• The highly stressed and wearing parts like support blocks and strikes are of special  alloy steels duly heat treated.

• Conforms to IS: 3766 - 2003, IS: 1598 - 1977, IS: 1757 - 1999, IS: 1499 - 2003 & BS: 131 Part I, II, III, IV and BS EN: 10045 - 1993 (for Charpy).

• Works on Pendulum principle, difference between height of drop of pendulum before repture and height of rise after repture of specimen is directly proportional ti Impact energy absorbed.
• Direct indication of Impact energy absorbed by specimen on large dial for AIT - 300 -N & AIT - 300 .
• Safety guard for the Operator.

Product Details:

DIGITAL IMPACT TESTING MACHINE, MODEL: AIT - 300 - D

Features:

• Suitable for Charpy and Izod Impact Tests on various materials.

•  Rigid designs of machine frame and other parts assure minimum energy absorption during fracture which results in improved test accuracies.

• The highly stressed and wearing parts like support blocks and strikes are of special alloy steels duly heat treated.

• It is digital version of conforms to IS:3766-2003, IS:1598-1977, IS:1757-1999, IS:1499-2003, BS:131-Part-I,II,III,IV & BS EN-10045-1993 (for Charpy)

• Direct indication of Impact energy absorbed by specimen on digital panel display.

• Safe guard for the Operator.  

Product Details:

Computerized brinell hardness tester, model opab - 3000 - ipc & opab - 3000 - ipc (spl)

General-


Computerized brinell hardness tester, model opab - 3000 - ipc & opab - 3000 - ipc (spl) are designed for brinell hardenss measurement on steels and other ferrous materials and also non ferrous materials like brass, bronze, aluminium, etc. The material can be cast, forged or rolled and the shape can be flat, round or irregular shapes.

Features-

• The actual load application system is of dead weight type combined with mechanical lever system. The supporting hydraulic system is for initial lifiting of load before each test and dampening the load application system for smooth application of load.

• A separate hydraulic power pack, positioned in the bottom part of the machine adds to the machine stability.

• Our unique design of a floating fulcrum lever system ensures high accuracy and dependability.

• An automatic indenter index system is provided which tilts the indenter after the impression and the magnifield image is visible on the ipc for measurement with a 0. 01mm least count.

• Thus this machine saves a lot of cycle time, improves accuracy of measurement & gives fast & accurate results with less operator fatigue

• This model is mainly useful for production testing in auto shops, foundries, forging shops and heat treatment units, etc.

• The machine accuracies confirms to is 2281 - 2005 & bs 240

Special additional features

• Machine is fully computerized system for indentation measurement and display.
• The image is scanned for measurement and hardness is displayed automatically.
• Accurate measurement of brinell hardness through matched optics, ccd camera with box image magnification, hardware and software using advanced image processing technology.
• It gives an image of indentation directly on inbuilt industrial pc of the machine with measurement facility and touch screen.
• Fine adjustment facility is provided for accurate measurement of the image.
• Auto, semi-auto and manual test facility.
• Quick compare mode for go no-go application.
• Coarse and fine position adjustment for manual test.
• Calibration modes - camera, axial & radial calibration (5 point calibration).
• Batch testing facility.
• Roll based access to features.
• Statistical analysis.
• Certificate generation.
• Search based on various parameters.
• Test report, certificate printing facility.
• Software compatibility with windows xp - sp2, vista, win - 7 - os.

Industrial panel PC specification-

• Fanless panel pc with 43 led touch screen panel and industrial motherboard specially designed for industrial application.
• Intel atom processor 1. 6 ghz, 1gb ddr2 ram.
• 8. 0" lcd monitor having resolution 800 x 600 (svga)

Product Details:

COMPUTERISED TENSILE TESTING MACHINE

• Latest Windows based, User friendly, Accurate Menu driven software.
• Fully automatic, on screen calculations based on the delivered data.
• Automatic data capture, storage & graphic display.
• Recording, storage & retrieval of results & details.
• Built in facility for printing of test results and the graph.
• Load measurement by load cell.
• Over Load & Over travel safety.
• On line display of Load, Elongation & Graph.
• Tare Load & Reset Elongation facilities available.
• Selectable units like N, kN, kgf, ibf, inch, mm etc.,
• Fully automatic on screen calculations like UTS, YS, proof stress etc.,
• Electronic Extensometer (Optional) is available for proof stress evaluation.
• It is possible to use a number of load cells, say two or thres to cover much wider range of load, to suit the application.
• Standard load resolution is wiht 10,000 counts. Finer resolution (optional) with 20,000 counts can also be offered at extra cost. Standard displacement resolution is 0.1mm.
• Types of tests, testing materials, grips, attachments, fixtures, straining speed as like analogue version.
• Various Models - Maximum capacity from 200 N to 50kN.
• Loading accuracy well within ± 1% conforms to IS: 1828 / BS : 1610 from 2% to 100% of capacity of load cell.

Product Details:

COMPUTERISED AUTOMATIC OPTICAL BRINELL HARDNESS TESTING MACHINE

FEATURES:

• The machine has a C- Type load frame.

• This machine has been designed for production testing & for continuous operation.

• This machine is used to measure Brinell Hardness value of cast or forged components.

• Since most of the operations are fast and automatic, the test speed is high with less operator fatigue.

• Fully Computerised system for indentation measurement and display.

• Windows based software system.

• Accurate measurement of Brinell Hardness through matched Optics, CCd Camera, Hardware & Software using advanced image processing technology.

• On removal of load the optics will transfer the image of indentation to CCD. The image is further digitalized and processed by PC for measurement. The diameter of the image can be measured automatically / manually to give Brinell Hardness Value.

• Two modes of measurement - Manual & Auto.

• In Auto mode the image is scanned for measurement & Hardness is displayed automatically.

• Verification facility is provided for clear indication of measured impression by encircling the same.

• Winjdowing facility is provided which encircles the blurt images for better accuracies.

• Macro & Micro adjustment facilities are provided in manual mode for fast & accurate encircling of the image to be measured.

• Bathc testing facility is provided.

• Statistical Analysis report can be generated.

• The cycle time (Except job loading / unloading ) is about 12 seconds per test.

• Calibration mode is provided with password protection.

• The machine accuracies conforms to IS: 2281 - 2005 & BS : 240